Skip to main content

Sicher 3d

New service across the UAE

Smart inspection 3D laser scanning across the UAE

We scan your site with LiDAR and 360° reality capture at every construction milestone, in Dubai, Abu Dhabi and across the UAE. Your consultant and the inspection team get a registered point cloud to overlay on the BIM model, walk through remotely and measure.

  • Scan point every 3–5 m
  • Camera at 150 cm
  • E57, RCP, LAS
3–5 m

between scan points

150 cm

camera height, at eye level

2+

scan points in every room

7

emirates covered from Business Bay

What is smart inspection scanning?

Smart inspection scanning is 3D laser scanning at a construction milestone. A LiDAR scanner or 360° camera records the site, and the point cloud is overlaid on the project's BIM model, so inspectors can compare what was built with what was designed, on screen, in virtual reality or on site.

Across the UAE, consultants, contractors and developers are moving site checks from phone photos and paper to measurable 3D records. In Abu Dhabi, DMT has built smart inspection into its Binaa platform and published scan rules for it. We use those rules as our capture standard on every project, in Dubai, Abu Dhabi and the other emirates, so the scan arrives complete, aligned and ready to review.

The same scan also serves as-built surveys, progress records and scan to BIM, so one site visit covers both the inspection and the documentation.

From site scan to BIM inspection in four steps

The same four steps on every project, run by one survey and BIM team from capture to the files your inspection team opens.

  1. Capture on site

    Scan points every 3–5 m at 150 cm, a set-up at every doorway so rooms align, and extra points at corners, bathrooms and storage rooms.

  2. Extract the point cloud

    Individual scans are registered into one point cloud and checked for coverage gaps before delivery.

  3. Overlay on the BIM model

    The point cloud is aligned to your BIM model, so design and as-built conditions sit in the same space for QA/QC.

  4. Inspect remotely or on site

    Reviewers walk the scan and measure, review it in VR, or check on site with a mixed-reality headset.

How we place scan points

Our capture standard is based on the smart inspection scan rules published by Abu Dhabi's DMT, and we use it on every UAE project. Pick a rule to see where it applies on a typical villa floor.

Surveyor levelling a laser scanner tripod in a villa doorway
Villa ground-floor plan with 23 scan points placed to the DMT smart inspection capture rules Living / dining / kitchen Majlis Bedroom Closet Bath Store Entrance hall 3–5 m door line 5 m
Every rule together 23 set-ups for one villa floor. Red dots are room set-ups; ringed dots are doorway set-ups that tie each room to the next.

Construction milestones worth scanning

Scan at every milestone, or only at the ones that matter most. The MEP stage, before walls and ceilings close, is where a scan saves the most rework.

  1. Laser scanner at a raft foundation rebar mesh before the pour

    Raft and foundation structure

    Record the reinforcement before it is covered, as a measured reference for the structural inspection.

  2. Laser scanner capturing exposed MEP conduits and pipes before close-up

    MEP before close-up

    Capture electrical and plumbing runs before walls and ceilings close, while issues are still cheap to fix.

  3. Laser scanner on a villa roof slab with exposed reinforcement

    Roof structure

    Document the roof slab and reinforcement for the roof structural inspection.

  4. Laser scanner in a finished villa majlis for the final inspection scan

    Final inspection

    A complete walkthrough of the finished building, on the way to the building completion certificate.

  5. Handover and facility management

    The owner keeps a measurable record of what sits behind every wall and ceiling for maintenance.

Engineer reviewing a point cloud overlaid on a BIM model
Inspector reviewing a scanned villa point cloud in virtual reality

Inspect the site without travelling to it

One capture serves every review format, so inspectors, consultants and owners can check the work from wherever they are.

Screen

Virtual walkthrough

Move through the scan room by room and take dimensions without a site visit.

Overlay

BIM comparison

The point cloud sits on the design model, so discrepancies show up as soon as you open it.

Headset

VR and mixed reality

Review spaces in VR with Meta Quest, or walk the site with the scaled BIM model in view using a mixed-reality headset such as HoloLens.

Who uses smart inspection scans

Consultants and supervision engineers

Get milestone scans captured to the guide, so inspection reviews start from complete, aligned data instead of a gallery of phone photos.

One capture standard on every project

Point cloud of a villa floor viewed on a tablet on site

Contractors

Show work as built at each milestone and close comments before they turn into rework.

Developers and villa owners

Follow progress without a site visit and keep a measured record of the building you paid for.

Facility managers

Receive a scan you can measure from years later: where services run, what sits behind a finish, and how the building was actually delivered.

LiDAR scanners and 360° cameras for smart inspection

Smart inspection capture uses a LiDAR scanner or a 360° camera. LiDAR scanners suit structural and MEP stages where measurements matter; 360° cameras suit visual walkthroughs and progress records.

Close-up of a reality capture scanner on a construction site

LiDAR scanners measured point clouds

FARO Focus Core 100MTerrestrial laser scanner
Leica RTC360Terrestrial laser scanner
Matterport Pro3LiDAR capture camera

360° cameras visual walkthroughs

Ricoh Theta Z1360° camera
Insta360 ONE RS 1-Inch360° camera

We agree the device with your consultant before we mobilise and capture from a levelled tripod at the guide's eye-level height. For full as-built surveys beyond the inspection, we also run GeoSLAM mobile LiDAR and Hi-Target survey instruments.

What you receive

Files your consultant, the inspection team and your BIM coordinator can open without conversion work.

Registered point cloud

All set-ups registered into one cloud and checked for gaps.

E57RCPLAS

Virtual walkthrough

A shareable 360° walkthrough with measurements, for inspectors who can't be on site.

Web linkVR ready

BIM overlay alignment

The point cloud aligned to your BIM model's coordinates for QA/QC against design.

RevitNavisworksIFC

Milestone record

A dated scan for each milestone, with extracted 2D views of key rooms.

PDFJPG

Scan to BIM model

Turn the point cloud into an as-built Revit model with our BIM and Revit team.

Add-onRVTIFC

As-built survey drawings

Plans, sections and elevations drawn from the scan by our AutoCAD team.

Add-onDWG

Site visit vs smart inspection scan

 Site visit onlySmart inspection scan
Who travelsEvery reviewer, every milestoneOne capture crew; reviewers work from the scan
Record afterwardsPhotos and site notesA measurable 3D record of every room
Design checkBy eye, against printed drawingsPoint cloud overlaid on the BIM model
Hidden servicesFound after finishes, when fixes cost mostScanned before close-up
Second lookAnother trip to siteOpen the scan and measure again

Why Sicher 3D for smart inspection scanning

Scanning is one step in the survey and BIM work we already deliver.

A survey company, not a photo studio

We are a 3D laser scanning, BIM and surveying company, and an authorised regional distributor for Hi-Target, FJDynamics and GeoSLAM.

Scan to model under one roof

The team that captures your site also delivers BIM, Revit, AutoCAD and 3D modelling, so the point cloud becomes drawings or a model without a hand-off.

Survey control when the site needs it

On larger plots we tie scans to site coordinates with GNSS RTK and total station control.

Ready for every review format

One capture serves the virtual walkthrough, the BIM overlay, VR review and the mixed-reality check on site.

Business Bay, Dubai25.1872°N 55.2664°E
All seven emiratesAbu Dhabi, Sharjah, Al Ain, Ras Al Khaimah
Villa community under construction in the UAE at dusk

3D laser scanning across the UAE

Smart inspection scans, as-built surveys and scan to BIM for villas, mid-rise and commercial projects in every emirate.

Dubai

Dubai Hills, Arabian Ranches, Tilal Al Ghaf, DAMAC Hills, Jumeirah, Business Bay and Dubai South, from our office in Business Bay.

Abu Dhabi

Abu Dhabi city, Al Reem, Saadiyat, Yas, Jubail Island, Reem Hills, Khalifa City, Al Shamkha and Al Ain.

Sharjah and Northern Emirates

Sharjah, Ajman, Umm Al Quwain, Ras Al Khaimah and Fujairah.

Smart inspection scanning FAQ

Something else on your project? Send the details on WhatsApp and a scanning engineer will answer.

Which emirates do you cover?

All seven. We are based in Business Bay, Dubai, and scan projects in Dubai, Abu Dhabi, Al Ain, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain, using the same capture standard everywhere.

Is smart inspection scanning mandatory?

It depends on the authority and the project. In Abu Dhabi, DMT's smart inspection scanning guide is a reference document rather than a regulation. In every emirate, your project's formal requirements and your consultant's instructions decide. We capture to the stricter standard either way, so the scan is ready if it is asked for.

What is the difference between 3D laser scanning and a 360° camera?

A LiDAR laser scanner measures the site as a point cloud you can dimension and overlay on a BIM model. A 360° camera captures panoramic images for visual walkthroughs and progress records. We recommend LiDAR for structural and MEP stages and 360° capture for visual progress.

How many scan points does a villa need?

Our standard is a scan point every 3 to 5 metres, at least two per room, a set-up at every doorway, and extra points at corners, bathrooms, storage rooms and walk-in closets. We count the points from your floor plans and include the number in the quote.

At which construction stages should we scan?

Most projects scan at the raft, roof and final stages. We also recommend scanning MEP services before walls and ceilings are closed, when issues are still cheap to fix.

Does a scan help with the building completion certificate?

The completion certificate is issued by the authority after its inspection, and a scan does not replace that. Where the inspection is carried out as a smart inspection, a complete final-stage scan gives the inspection team and your consultant the record they review. In November 2025, Jubail Island villas in Abu Dhabi completed DMT's smart inspection and received completion certificates.

What files do we receive?

A registered point cloud in E57, RCP or LAS, a measurable 360° virtual walkthrough link, the point cloud aligned to your BIM model for overlay, and a dated milestone record. Scan to BIM models and as-built drawings in Revit or AutoCAD are available as add-ons.

How is smart inspection scanning priced?

Each project is quoted on floor area, number of milestones, location and deliverables. Send the plot location, floor plans and milestone dates on WhatsApp and we reply with the scan-point count, the device and a quote.

Which scanners and cameras are used?

DMT's smart inspection guide lists three LiDAR scanners (FARO Focus Core 100M, Leica RTC360 and Matterport Pro3) and two 360° cameras (Ricoh Theta Z1 and Insta360 ONE RS 1-Inch). We confirm the device with your consultant before we mobilise.

Is Sicher 3D affiliated with DMT?

No. Sicher 3D is an independent 3D laser scanning and BIM company. We follow DMT's published scan rules; we are not appointed or endorsed by DMT.

Book a scan for your next milestone

Send the plot location, floor plans and milestone date. We reply with the scan-point count, the device we'll use and a quote.

Sicher 3D Building Model Makers LLC is an independent company and is not affiliated with, appointed by or endorsed by the Department of Municipalities and Transport (DMT). The Abu Dhabi Smart Inspection Scanning Guide is a DMT reference document; always follow your project's formal requirements. Device names are trademarks of their respective owners. Photos are illustrative.